Water Heaters - Gas

Ask about our 12-yr Manufacturer’s Warranty

Available in 30, 40, 50, 75 and 100 Gallon Tall – 30, 40, and 50 Gallon Short Models – Natural or LP Gas.

Features:

  • VAPORSHIELD TECHNOLOGY – Shuts off gas and air supply to heater to prevent prolonged vapor burn in combustion chamber should accidental or unattended ignition of flammable vapors occur outside the water heater (except 75-76-AS R-6 and 100-83- AS R-6).
  • PIEZO IGNITER – Affords push button pilot lighting in lieu of matches (except 75-76-AS R-6 and 100-83- AS R-6).
  • MAINTENANCE FREE – No periodic cleaning of combustion air inlet necessary under normal conditions.
  • STANDARD THERMOCOUPLE – Design provides for use of either factory supplied thermocouple or standard replacement thermocouple.
  • SELF-CLEANING – Turbulence inducing cold water inlet-tube engineered to diminish hard water area sediment deposits.
  • NON-CFC FOAM INSULATED – Saves energy and reduces fuel costs by maximizing heat retention.
  • HIGH EFFICIENCY MODELS – meet energy-efficiency .62 EF (Energy Factor) requirements of many gas utility rebate programs, comply with CEC Title 24 and are Energy Star certified.
  • HEAVY GAUGE STEEL TANK – For extra years of trouble-free service.
  • GLASS-LINED TANK – Inner tank glass-lined with Dura-Glas™ and fired at 1600° F for optimum protection from the effects of corrosion.
  • MAGNESIUM ANODE ROD – To protect tank life.
  • FACTORY INSTALLED DIELECTRIC HOT AND COLD WATER CONNECTIONS – 3/4” NPT water connections to extend tank life and for easier installations
    (1 1/2" NPT on 75-76-AS R-6 and 100-83-AS R-6).
  • BRASS DRAIN VALVE – Durable to prevent unintentional breakage.
  • FACTORY INSTALLED HEAT TRAPS – Reduces standby heat loss in water piping (except 75-76-AS R-6 and 100-83-AS R-6).
  • TEMPERATURE AND PRESSURE RELIEF VALVE – Factory provided T & P Valve can be relocated from side to optional top opening.
  • FACTORY INSTALLED ENERGY CUT-OFF SYSTEM – Automatic thermostat with built-in gas pressure regulation also incorporates energy cutoff switch to prevent abnormally high water temperature for added safety.
  • DESIGN CERTIFIED BY CSA INTERNATIONAL – To meet or exceed ANSI requirements and tested in accordance with D.O.E. test procedures and meets or exceeds the energy efficiency requirements of NAECA, ASHRAE and all state energy efficiency standards.
  • CHOICE OF SIX OR TWELVE YEAR LIMITED TANK WARRANTIES – Includes 6 or 12 Year Limited Warranty on Component Parts.